Automatic Backwash Self Cleaning Filter Agricultural Water Saving Purification

Basic Info.

Product Description

Product structure
1:Water inlet2.Screen3:Automatic drain valve4: Hydraulic piston5:Suction nozzle6:Axis7:Water outlet8:Hydraulic motor
Product principle
The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.Self-cleaning mode can be started by pressing, timing or manual three ways, following the principle of pressure difference.When the internal and external pressure difference reaches the set value, the self-cleaning mode starts.Drain pipe hydraulic valve open, sucking the scanner to produce negative pressure suction nozzle inside, absorbing impurities, at the same time sucking scanner in under hydraulic motor along the inside surface mesh do reciprocating screw, movement, no cleaning blind area, impurities by the discharge outlet.The cleaning time of self-cleaning filter is set by the controller in advance, the drain valve is closed after cleaning, and little water loss in cleaning process.
Technical parameters
A single maximum flow capacity is up to 4000m3 / hWide filtration range:screens from 4000 to 20 micronsWorking pressure(min)≥0.18MpaWorking pressure(max)≤1.6MPa(customized is available)Working temperature ≤65ºCPower supply: 220 v / 50 Hz (Customized is availabel)Cleaning method: suctionAdjustable cleaning time: 10-200 seconds
Filter material
Shell: carbon steel, 304 stainless steel, 316L stainless steelScreen: 304 stainless steel, 316L stainless steelDrain valve, cast iron,copper,stainless steel,PVC,nylonController: PVC, aluminumSeal ring: EPDM rubberSuction: stainless steel, PVC

Loss of pressure table